Komodo Accessories
A Komodo Kamado comes standard fully loaded with everything you need for pretty much every type of cooking over charcoal. The following optional accessories let you do specialised cooking, baking or gives you a work surface or storage.
|
These have an engineered heat transfer formula that’s just right for bread and pizza. The top surface is cast in a ultra smoothpolished finish. 15″ @ $48 16″ @ $60 17″ @ $68 + UPS Ground (if shipped separately) |
 |
Charcoal basket splitter Kit – Let’s you burn half or a quarter of a basket to sear or do two zone cooking, half direct and half indirect. The stainless insert effectively cuts off half the airflow which effectively doubles the airflow. 4 pce kit fits into the standard charcoal basket. Basket itself not included
$144 + UPS Ground (if shipped separately)
|
This beautifully crafted rib rack uses 1/4″ 304 stainless rod that utilises all of the 23″ KK’s main grill’s territory to cook as many ribs as possible. Eight slots and can also be used under the upper grill. $80 + UPS Ground (if shipped separately) |
 |
Komodos have built-in sleeves to use these rotisserie cradles. Choose from a 6″ or 8″ cradle. The 6″ holds chickens perfectly and turns them on their axis. The 8″ turns turkeys on their axis and also works well with large cuts like rib roasts
6″ Cradle with 2 arms $74 8″ Cradle with 3 arms $92 8″ Cradle with 3 arms and 6″ reducer $110 + UPS Ground (if shipped separately)
|
Gas is not always a four letter word around here.. The 23″ Ultimate has a second rear door assembly for the gas burner. I recommend this ONLY for lighting charcoal for high temp cooks e.g. searing or pizza. The burner lights too much charcoal for low and slowcooking.Charcoal also burns down so it needs to be lit from the top of the basket not the bottom. The burner is a reliable source of additional clean BTUs. With an adjustable regulator, you can bake pizzas at 650ºf with the gas alone. $178 + UPS Ground |
|
This is the Rod and tube/hanging side table is what I recommend and personally use. They can be removed completely leaving a very small unobtrusive bracket behind in 2 seconds. They can also be hung vertically for storage. If left outside teak will silver.. I use these rod and tube myself because I do not store the tables on the KK. $180 each + UPS Ground
A bit overkill for side tables, these folding stainless side assemblies with removable teak tables use the same high end best ofthe best method of fabrication as the rear hinge assembly. The folding table’s stainless bracket is CNC laser cut and CNC folded brushed sheet metal then tig welded. You are able to quickly remove the teak table but removing the large folding stainless table support requires using a wrench. $288 each + UPS Ground
|
This workstation matches your KK grill in both design and build quality. The storage compartments are designed to hold all the accessories made for your Grill. Crafted out of recycled old-growth teak and of course mortise and tenon construction. Cabinet Size: 33.86″ x 61.61″ x 28.35″ ~ 86 x 156.5 x 72 CM Cabinet weight (net): 168 lbs ~ 76 Kg Crate Size: 63.39″ x 41.34″ x 33.07″ ~161 x 105 x 84 CM Crate Gross weight: 240 lbs ~ 109 Kg $1740 |
 |
 |
 |
